Shelly BLU Gateway | Bluetooth-WLAN-Gateway in einem USB-A-Dongle | Hausautomation | Kompatibel mit Alexa & Google Home | iOS Android App | Kabellos

Shelly BLU Geräte lassen sich (noch) nicht in Google Home integrieren und auslesen und somit ist Shelly-BLU nicht für die Automation in Google Home geeignet.
Nur die Shelly Wlan-Geräte funktionieren weitestgehend mit Google Home.

Questo è un gateway ovvero un ponte tra un dispositivo Shelly blu ,funzionante con Bluetooth a basso consumo, e il mondo Shelly. Necessita di essere alimentato da un piccolo alimentatore tipo ricarica smartphone, ma attenzione funziona anche ottimamente se alimentato da una presa usb presente nei vari modem- router che ci forniscono Internet a casa ( a me funziona su un router Fastweb). Molto sensibile in ricezione.

Instructions were clear on how to connect to it’s WiFi admin point and login. Home Assistant picked it up, but also has a very professional/robust web interface to login and do stuff.

This is a great little device for hacker and smart home hobbyists who are looking for an open system to play with, that also just does the trick (extending USB) for Home Assistant.

I have a lot of ble temperature sensors around the house and was using both native bluetooth on my intel nuc running HAos and also another bt dongle connected via usb/ethernet extension; but with 3 floors on the house needed another bluetooth gateway. There are plenty of esphome projects to do this, but was impatient and didn’t want to wait for m5 stack atoms I have ordered to come, so took a chance on the shelly gateway with next day arrival.

It took a few tries to get this set up onto my network. My last shelly products were natural gas sensors I set up for local control ages ago and control directly from ip address so I hadn’t loaded the app in forever. I opened shelly app to be prompted to install the new shelly app as that one is discontinued. The new app found the gateway immediately once set to scan BT but failed repeatedly to bring it onto the network despite several resets.

Finally I went with the alternate route in the instructions which is to pair to its own setup wifi network on your phone and configure from there in a browser. Once I had done that, I reloaded the app and locked the device to its own ip address. Turned off cloud control for the device and removed the app.

Home Assistant found the device right away (it popped up on my computer screen while I was deleting shelly app. Configured device for passive scanning (you would want it set to active if using shelly buttons or motion detectors or something like that; for ble sensors, passive is fine).

To test that the device was actually pulling data from sensors, I moved it (its a usb stick that plugs into any usb charging brick, its not battery powered) to rooms that had sensors in it far away from the nuc and saw the rssi drop dramatically on next scan. For best usage and aggregration, I positioned the gatway in a recessed outlet in by the 2nd to 3rd floor stairs. Checked data on bluetooth devices the next day and found much better readings for all devices, HA charts were showing mean/median for all devices instead of single readings.

This lead me to believe the secondary plugged in bt adapater is conflicting with the built in nuc bluetooth. Despite both being installed and configured it seems only one or the other works (probably why HA recommends mqtt/wifi gateways for bluetooth).

I may purchase another so I have gateways on all 3 floors (nuc basement, shelly 1st floor, shelly 2nd floor) and reused the esp devices that eventually will come from china to another project.

Corresponde conforme descrito

Ottima assistenza, prodotto consigliabile

Funktioniert sehr gut. Einbindung in HA problemlos.